Bindery / Book Binding Services

STITCHING HEADS & WEAR PARTS

DELUXE STITCHER

G5 STITCHER HEAD

A smaller capacity head with greater reliability, the Deluxe G5 Stitcher Head is an answer to our customers' requests. From its front locking mount system to its latchless construction and side-feed operation, this stitching head is easy to use. No tools are required to thread or operate the Deluxe G5 Stitching head and only a single adjustment is needed to change the wire draw.

CAPACITY: From 2 sheets up to 3/16"
CROWN SIZE: 1/2"; 13/16" loop
WIRE SIZE: 25 round
MINIMUM HEAD CENTER: 1-1/2" (39mm)
SPEED: 12,000 stitches per hour

JORSON # DESCRIPTION
9083A Clincher Points, Thick, Round
9093A Clincher Slide - Thick
9084B Adjustable Clincher Slide
G50152 Driver - 25 Gauge Wire
G50151 Driver Bar
G50145B Moving Wire Cutter
G50200 Fixed Wire Cutter
G50147BAA Bender Bar Assembly
G50559A Wire Holder Assembly
G50159 Friction Plate
G50140 Follower Ball Bearing

G8 STITCHER HEAD

The Deluxe G8 Stitching Head side-feed design eliminates the Swivel, wire jamming and dropped stitches. This stitching head can be used on any stitcher or collator using the following stitcher heads: Deluxe 26/26D, ISP/Intertlake/Acme Champion 26, Magnetek, Hohner 52/8, Hohner 55/7, Hohner 48/5. User friendly features include: "snap-out" wire tube, "swing-away" wire holder spring and an on/off feed lever.

CAPICITY: 2 sheets up to 5/16" (8mm)
CROWN SIZE: 1/2", 13/16" loop
WIRE SIZES: 23 to 28 round & 21 x 25 flat
MINIMUM HEAD CENTER: 2-3/64" (52mm)
SPEED: 20,000 stitches per hour / 12,000 loop s/p/h
OPTIONS: Loop and Stop Stitch Kits

JORSON # DESCRIPTION
9083A Clincher Points, Thick, Round
G20115 Latch Release Cam
G20122A Feed Slide (retains screw assembly)
G20140 Follower Ball Bearing
G20145 Moving Wire Cutter
G20149 Bender Bar Latch
G20150 Bender Bar Latch Spring
G20151 Driver Bar
G21052 Driver - 24 Gauge Wire
G20159 Bender Bar Friction Plug
G20160B Bender Bar Friction Spring
G21084 Wire Holder (retaining spring foot)
G20200 Fixed Wire Cutter

26/26D STITCHER HEAD

The Deluxe 26/26D Stitcher Head is completely interchangeable with ISP/Interlake/Acme Champion stitcher heads. All round wire stitcher heads come standard with our new, stronger magnetic swivel.

CAPACITY: 2 sheets up to 1/4"
CROWN SIZE: 5/16", 3/8", 1/2", 5/8"
WIRE SIZE: 23 to 28 round or 21 x 25 flat
MINIMUM HEAD CENTER: 1-7/8"
SPEED: 12,000 stitches per hour
WEAR PARTS: common

JORSON # DESCRIPTION
9009-25 Driver
9012A Driver Bar Assembly
9014 Latch
9015 Grip
9019 Grip Spring
9038M Swivel Assembly
9048 Wire Cutter
9050 Wire Cutter (oper. slide friction plug)
9051 Wire Cutter Slide (friction spring)
9083 Clincher Points - Thin
9083A Clincher Points - Thick
9098 Tension Pawl
9103 Wire Straighten Roller
9113B Bender Bar Friction Spring
9124 Wire Straightener Roll Clip
9134 Tension Pawl Spring

18D STITCHER HEAD

The Deluxe 18D Stitcher Head is still considered to be the "workhorse" stitcher head to the large saddle binderies of the world.

CAPACITY: 2 sheets to to 9/16"
CROWN SIZE: 3/8", 1/2", 5/8", 3/4"
WIRE SIZE: 20 to 28 round, 19 x 21-1/2 flat, 20 x 24 flat, 21 x 25 flat
MINIMUM HEAD CENTER: 3"
SPEED: 16,000 stitches per hour

JORSON # DESCRIPTION
19065A Swivel - 1/2"
15101 Stationary Wire Cutter - 1/2"
15011-25 Driver - 1/2"
7024B Clincher Point - Flat - 1/2"
15031 Grip - Square
19121 Wire Straighten Roll
15113A Wire Cutter Operating
15038 Grip Spring
7232 Swivel Hook
15032A Grip Holder Assembly

G20 STITCHER HEAD

The Deluxe G20 Stitcher Head has a "side-feed" design that eliminates the swivel, wire jamming and dropped stitches. This stitcher head can be used on any dual-drive sttcher or saddle- binder using Deluxe 18D stitching head or Hohner 70/20 stitching heads including machines for: Bielomatic, ECH Will, Harris, Kugler, McCain, Sheridan and others. User-friendlhy features include a "snap-out" wire tube, a "swing-away" wire holder spring and an on/off feed lever.

CAPACITY: 2 sheets up to 3/4"
CROWN SIZE: 1/2", 5/8"
WIRE SIZES: 20 to 28 round, 19 x 21-1/2 flat, 21 x 25 flat, 20 x 24 flat
MINIMUM HEAD CENTER: 2-3/4 at 1/16" thickness
SPEED: 18,000 stitches per hour, 12,000 Loop s/p/h
OPTIONS: Loop and Stop Stitch Kits

JORSON # DESCRIPTION
G20145F Moving Wire Cutter - Flat Wire
G20210 Cutter Operating Spring
G20252 Wire Hook
G20253 Wire Hook Spring
G20262A Feed Lever Pin Assembly
G20262BA Deed Lever Pin Assembly
G20263 Feed Lever E-ring
G20540 Feed Lever Bearing
G20556 Driver 1/2" 20-24 (wire)
G20586 Feed Gear Friction Spring
G20587 Feed Gear Friction Plug
G20600 Fixed Wire Cutter
G20638 Feed Rack Cam Plate
G20666 Feed Lever Bearing Pin
G20668 Feed Lever Spring

DB45 STITCHER HEAD

The Deluxe DB series stitcher heads work on most Muller Martini saddle stitchers, including models 221, 235, 1509, 321, 335, the Minuteman, Prima, Valore, Bravo-S, Bravo-T, Presto and many others. The DB45 Stitcher Head is an ideal choice for these machines.

CAPACITY: 2 sheets up to 1/8" (3mm)
CROWN SIZE: 7/16" (11mm)
WIRE SIZE: 25 to 28 round
EXPLODED DB45 HEAD

JORSON # DESCRIPTION
9009-25 Driver
9012A Driver Bar Assembly
9015 Grip
9019 Grip Spring
9038M Swivel Assembly
9048 Wire Cutter
9050 Wire Cutter Operating Slide Friction Plug
9051 Wire Cutter Slide Friction Spring
9083 Clincher Points - Thin
9082A Clincher Points - Thick
9098 Tension Pawl
9103 Wire Straighten Roller
9113B Bender Bar Friction Spring
9134 Tension Pawl Spring

DB75 & DB75V STITCHER HEAD

The Deluxe DB75 & DB75V stitcher heads work on most Muller Martini saddle stitchers including the 221, 235, 1509, 321, 335, the Minuteman, Prima, Valore, Bravo-S, Bravo-T, Presto and many others.

CAPACITY: 2 sheets up to .236" (6mm)
CROWN SIZE: .511" (13mm)
WIRE SIZE: 23 to 25 round, 21 x 25 flat, 20 x 24 flat
DB75VS also available for Muller Martini 301, Tempo & Supra

JORSON # DESCRIPTION
07145C Moving Cutter - Carbide
07152-25 or 070552-25 Driver (DB75) 25-28
070183 Wire Holder Retaining Spring
070230 Cutter Operating Lever
070600C Fixed Cutter - Carbide
072014 Moving Cutter Screw
072018 Screw - Nylon - M4 x .7 x 6
073008 Rivet
073009 Hook Pivot Pin - Nylon
074001 Wire Holder Spring
077011 Hook Guide
077012 Bender Slide Insert
07014 Clincher Slide Assembly
077015 Clincher Point - 1/2"

O.E.M. TRADE NAMES, BRANDS AND TRADEMARKS ARE PROPERTY OF THEIR RESPECTIVE COMPANIES. JORSON AND CARLSON DOES NOT IMPLY WE OFFER GENUINE O.E.M. PARTS.